Self-Priming Pump – 6 Inch DSP/HD 6000 173-HP
STANDARD CONFIGURATION – 6-INCH SELF-PRIMING SLURRY PUMP
- 6-Inch EDDY Pump
- 173-HP John Deere Diesel Engine
- 12k Dual Axle Trailer w/ 16” 10ply Trailer Tires & Electric Brakes
- 160 Gallon Fuel Cell w/ Fuel Cap Risers
- 2 5/16 Coupler with 5 position channel adjustment
- Check Valve in diaphragm prime line/ 1/2” ball valve
on centrifugal pump for draining - Over the Road Light Package
- Accessories: Integrated Lifting Bell, Dual 8k Leveling
Jacks, Work Light, Flow Gauge & 4 D-Ring TieDowns
PUMP SPECS
| MIN FLOW | 450 GPM |
| MAX FLOW | 2000 GPM |
| HEAD RANGE | Up to 200 ft |
| DISCHARGE SIZE | 6 inch |
| SUCTION SIZE | 8 inch |
| SOLIDS HANDLING | Solids up to 5 inches |
| MAX SPEED | 1800 RPM |
| PERCENT SOLIDS | Up to 40-70% Solids |
ENGINE PERFORMANCE DATA
| Engine Speed (rpm) | 2400 | 2200 | 2000 | 1800 | 1600 | 1400 | 1200 | 1000 |
| Power (hp) | 200 | 200 | 193 | 183 | 172 | 152 | 127 | 103 |
| Torque (lb-ft) | 437 | 477 | 506 | 535 | 564 | 572 | 557 | 542 |
| BsFC (lb/hp-hr) | 0.375 | 0.371 | 0.374 | 0.37 | 0.374 | 0.36 | 0.357 | 0.364 |
| Fuel (gph) | 10.6 | 10.5 | 10.2 | 9.5 | 9.1 | 7.7 | 6.4 | 5.3 |
Why Choose EDDY Pump’s Self-Priming Pump – 6 Inch 173-HP
- Powerful Performance: 173-HP John Deere engine for handling abrasive slurries and high solids.
- Durable Construction: Built with high-chrome and stainless-steel components for long-lasting reliability.
- Minimal Maintenance: Features dry-run capability, high-viscosity tolerance, and a self-contained seal flushing system.
- Ready for Rapid Deployment: Mounted on a 12k dual-axle trailer with leveling jacks, lifting bell, and 160-gallon fuel tank.
- Peace of Mind: Backed by a 2-year, 2000-hour warranty for added reliability.
Self-Priming Pump Comparison Table
| Model | Discharge Size | Suction Size | Power | Flow Range (GPM) | Head Range (ft) | Solids Handling | % Solids by Weight | Max Speed (RPM) | |
|---|---|---|---|---|---|---|---|---|---|
| DSP/HD 3000 | 3" | 4" | 43 HP | 100 - 780 | Up to 130 | Up to 2" | 40-70% | 1800 | ENG |
| DSP/HD 4000 | 4" | 6" | 43 HP | 250 - 1200 | Up to 200 | Up to 3" | 40-70% | 1800 | ENG |
| DSP/HD 4000 | 4" | 6" | 115 HP | 250 - 1200 | Up to 200 | Up to 3" | 40-70% | 1800 | ENG |
| DSP/HD 6000 | 6" | 8" | 115 HP | 450 - 2000 | Up to 200 | Up to 5" | 40-70% | 1800 | ENG |
| DSP/HD 6000 | 6" | 8" | 173 HP | 450 - 2000 | Up to 200 | Up to 5" | 40-70% | 1800 | ENG |
| DSP/HD 8000 | 8" | 10" | 550 HP | 1600 - 5000 | Up to 240 | Up to 7" | 40-70% | 1200 | ENG |
| DSP/HD 10000 | 10" | 12" | 550 HP | 1600 - 5000 | Up to 240 | Up to 9" | 40-70% | 1200 | ENG |
| DSP/HD 12000 | 12" | 14" | 700 HP | 2600 - 7300 | Up to 180 | Up to 11" | 40-70% | 900 | ENG |
Pump Construction & Materials
| PARTS | STANDARD MATERIALS |
| ROTOR | High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless - Various sizes and custom metals available |
| VOLUTE CASING | High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless - Custom metals available |
| SHAFT | Chromoly or Stainless Steel |
| MECHANICAL SEAL | Dual Tungsten or Silicon CarbideMechanical Seal with Self Contained Seal Flushing System |
| BEARING HOUSING | Ductile Iron or Stainless Steel |
ENGINE SPECS
- 173-HP (129kW) Tier III John Deere Diesel Engine – Model 6068HF285 – 2200 RPM
- Liquid Cooled, 12 Volt Power In-Line 4 Cycle Turbo Charge Diesel
- Electronic Fuel System
- Murphy Digital Instrumentation, ECU w/ de-rates and shutdowns
- 2 Year 2000-Hour Warranty
6-inch self-priming slurry pump in
real world applications
PUMP CURVE
The pump curve for the 6-inch 118/125-HP self-priming pump highlights its ability to deliver higher flow at moderate head while handling larger solids. It supports pipeline sizing and flow-control decisions, ensuring consistent throughput during dredging, tailings transfer, and sludge handling without risking loss of prime or excessive wear.
How the EDDY Self-Priming Pump Redefines Fluid Handling
How It Works: Advanced Fluid Dynamics in Action
Vortex-Induced Suction
The pump’s rotor sits recessed from the volute, creating a tornado-like vortex within the pump casing. This vortex generates suction and thrust, drawing in slurry and suspended solids without requiring direct contact with the rotor vanes. The result is a powerful yet gentle pumping action that minimizes mechanical wear and tear.
Self-Priming System
Integrated with a diaphragm prime line and check valve, the pump can automatically evacuate air from the suction line and begin pumping without manual priming or external vacuum assistance. This reduces downtime and simplifies startup in remote or challenging environments.
Dry-Run Tolerance
Traditional pumps suffer seal damage when run dry. The EDDY Pump, however, features a self-contained seal flushing system and special seal configurations that allow it to handle temporary dry-run conditions without harm. This feature is particularly beneficial in applications such as dewatering or intermittent flow scenarios.
Solids Handling Without Clogging
With the ability to pass solids up to 4 inches in diameter, the open rotor and large volute path eliminate clogging issues common to impeller-based systems. The internal flow path ensures that abrasive and viscous materials move freely, making it ideal for harsh slurry applications.
Minimal Turbulence and Cavitation
The design avoids high-velocity impeller impacts that typically lead to cavitation. By generating a consistent flow pattern, the EDDY Pump preserves fluid integrity and extends the life of the equipment.
EDDY Self-Priming Pump vs Conventional Technologies
| Feature | EDDY Self-Priming Pump | Centrifugal Pump | Diaphragm Pump |
|---|---|---|---|
| Solids Handling | Up to 4 inches without clogging | Limited (<1 inch) – prone to clog | Moderate – subject to diaphragm wear |
| Dry-Run Capability | Yes, without damage | No – causes seal/bearing failure | Limited – diaphragms may rupture |
| Priming Requirement | Automatic self-priming | Requires manual or vacuum assist | Self-priming but slow |
| Maintenance Needs | Low – fewer moving parts | High–impellers and seals wear | Moderate – diaphragm replacements |
| Abrasive/Viscous Fluids | Excellent performance | Poor – wear issues | Fair – but limited flow capacity |
| Flow Disruption from Solids | Minimal | Frequent blockages | Moderate risk |
| Energy Efficiency | High with thick slurries | Efficient with clean water only | Lower – less volume per stroke |
Industrial Applications
Dredging and Sediment Removal
Mining Tailings
Industrial Wastewater Treatment
Construction Dewatering
Pumping for Environmental Remediation
The Best Non-Clog and High Solids Slurry Pump on the Market. Since 1984.
We manufacture both pump and dredge equipment for maximum compatibility
Call for sales or support
If you need assistance with pump selection, sales or engineering support, call 619-404-1916.
FAQs
What types of materials can the 6-inch DSP/HD 6000 self-priming pump handle?
This high-performance DSP/HD pump is engineered to handle abrasive slurries, sludge, and solids-laden fluids without clogging or excessive wear.
Which industries benefit most from using the DSP/HD 6000 pump?
The 6-inch self-priming pump is ideal for construction dewatering, mining tailings management, dredging, oil & gas, and municipal wastewater applications.
Is the 6-inch DSP/HD 6000 pump trailer-mounted and road-ready?
Yes. The unit includes a dual-axle trailer with electric brakes, 16” 10-ply tires, and DOT-approved lighting for on-road transport.
What are the engine options available for the DSP/HD 6000 self-priming pump?
It comes in both 118 HP DSP/HD 6000 and 125 HP DSP/HD 6000 diesel engine configurations, depending on site requirements and performance needs.
How long can the pump operate on a single fuel fill?
The 160-gallon fuel cell ensures long run times, making the 6-inch 118/125 HP self-priming pump ideal for remote or continuous operations.
Does this self-priming pump require manual priming?
No. It features a diaphragm prime line with a check valve, enabling automatic self-priming and reducing startup time.
How large a solid can the pump handle?
The 6-inch DSP/HD 6000 pump can pass solids up to 4 inches in diameter, making it suitable for harsh slurry and debris-heavy applications.
Can the pump run dry without damaging the system?
Yes. The DSP/HD series self-priming pump is designed for dry-run capability, reducing maintenance and preventing seal failure.
What accessories are included in the standard configuration?
Each unit includes dual 8k leveling jacks, a lifting bell, a work light, a flow gauge, and four D-ring tie-downs for stability and ease of use.
Can the 6-inch self-priming pump 118 HP or 125 HP version be customized?
Absolutely. EDDY Pump offers customizations for the pumps to meet specific site conditions or operational requirements.
HD (Heavy Duty) Slurry Pumps / Dredge Equipment
Related Products
For assistance Call 619-404-1916 and let us help match your project
with the right pump.