Dredge Sled – Patented Lagoon Dredging Equipment Hydraulic Driven 4-Inch
Model: DSH-4000
OPERATING LEVELS
| MIN FLOW | 250 GPM |
| MAX FLOW | 1200 GPM |
| HEAD RANGE | Up to 160 ft |
| DISCHARGE SIZE | 4 inch |
| SUCTION SIZE | 6 inch |
| SOLIDS HANDLING | Solids up to 3.5 inches |
| MAX SPEED | 1800 RPM |
| PERCENT SOLIDS | Up to 40-70% Solids |
| CU YD MATERIAL HR | 75-150 |
INCLUDED EQUIPMENT
• 4-inch High Chrome Eddy Pump with a Hydraulic Motor
• Floating Dredge
• 300-ft of traversing cable
• Solar panel charging system to charge the lifting winch battery.
• Winches. Remote-Operated Lifting Winch 12V and 110V Traversing Land Winch
• Gas Generator 110 VAC output to power the Traversing 110V Land Winch
REQUIRED EQUIPMENT TO OPERATE ATTACHMENT
- 125hp HPU (hydraulic power unit)
- 4” material handling discharge hose and floats
OPTIONAL EQUIPMENT TO ENHANCE OPERATION OF DREDGE
- Wireless Doppler flow meter
- Discharge line pressure gauge (0-150 psi)
- High pressure jetting ring
EDDY Pump industrial Dredge Sleds are non-clog pumps designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications
Available in alternative power options and pump sizes depending on your application
APPLICATIONS
• Mining (Mineral Recovery)
• Lagoon Dredging
• Sand & Agg
• Shallow Industrial Ponds
• Dams
• Fly Ash & Coal Ash
FEATURES & BENEFITS
• Non-Clog, High Viscosity, High
Specific Gravity, HighAbrasives,
Low pH Pumping Design
• Transport 40-70% Solids
• Ability to pump objects of up to
3.5-inches in diameter
APPLICATIONS
• Sludge
• Slurry
• Bio-Sludge
• Mine Tailings
• Minerals
• Sand Mixtures
| Production: 250-2500 GPM or 75-150 cubic yards of material per hour | ||
| Head with 125HP hydraulic motor (12” rotor) | Up to 160 feet | Up to 61m |
| Overall Weight (without pump) | 3,307 lbs | 1,500kg |
| Overall Length | 9.8 feet | 3 m |
| Overall Height | 5.6 feet | 1.7 m |
| Overall Width | 12.5 feet | 3.8 m |
| Depth masts max lift (above waterline, pump retracted) | 17.4 feet | 5.3 m |
| Standard Operating Depths | 1.6 to 16 feet | 0.5 to 5m |
PUMP CURVE
A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is
matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency.
EDDY Pumps are primarily used for high solids, slurry, sludge, and de watering.
EDDY Pump – 4 Inch 4000 – Pump Curve
WE PUMP SOLIDS, NOT WATER
Call for Sales or Support
If you need help with Pump Selection, Sales or Engineering Support
Call 619-404-1916