Self-Priming Pump – 4 Inch 74-HP
4-Inch DSP/HD 4000 74-HP Self Priming Pump
STANDARD CONFIGURATION
- 4-Inch EDDY Pump
- 74-HP Tier-4 John Deere Diesel Engine
- 6k Single Axle Trailer w/ 16” 10ply TrailerTires
- 96 Gallon Fuel Cell
- 3 Position 2-5/16 HD Hitch
- Over the Road Light Package
- Integrated Lifting Bail w/ Dual 8k Leveling Jacks
- Accessories: Work Light, Flow Gauge & 4 D-Ring Tie
Downs
PUMP SPECS
| MIN FLOW | 250 GPM |
| MAX FLOW | 1200 GPM |
| HEAD RANGE | Up to 200 ft |
| DISCHARGE SIZE | 4 inch |
| SUCTION SIZE | 6 inch |
| SOLIDS HANDLING | Solids up to 3 inches |
| MAX SPEED | 1800 RPM |
| PERCENT SOLIDS | Up to 40-70% Solids |
| PARTS | STANDARD MATERIALS |
| ROTOR | High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless - Various sizes and custom metals available |
| VOLUTE CASING | High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless - Custom metals available |
| SHAFT | Chromoly or Stainless Steel |
| MECHANICAL SEAL | Dual Tungsten or Silicon CarbideMechanical Seal with Self Contained Seal Flushing System |
| BEARING HOUSING | Ductile Iron or Stainless Steel |
ENGINE SPECS
- 75-HP Diesel Engine – John Deere PowerTech EWX 4.5L
- 12 Volt Power In-Line 4 Cycle Turbo Charge
- Tier 4 Engine
- Electronic Fuel System
- Manual Control Panel
ENGINE PERFORMANCE DATA
| Engine Speed (rpm) | 2400 | 2200 | 2000 | 1800 | 1600 | 1400 | 1200 | 1000 |
| Power (hp) | 74 | 74 | 74 | 72 | 68 | 59 | 48 | 36 |
| Torque (lb-ft) | 162 | 176 | 194 | 212 | 224 | 212 | 209 | 193 |
| BsFC (lb/hp-hr) | 0.459 | 0.435 | 0.413 | 0.394 | 0.390 | 0.397 | 0.385 | 0.369 |
PUMP CURVE
A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency. EDDY Pumps are primarily used for high solids, slurry, sludge, and dewatering.
EDDY Pump – 4 Inch – Pump Curve
WE PUMP SOLIDS, NOT WATER
Call for Sales or Support
If you need help with Pump Selection, Sales or Engineering Support
Call 619-404-1916
Call 619-404-1916