Dredge Sled – Patented Lagoon Dredging Equipment Electric Driven 4-Inch
Model: DSE–4000
DREDGE SLED OPERATING LEVELS
MIN FLOW | 250 GPM |
MAX FLOW | 1200 GPM |
HEAD RANGE | Up to 160 ft |
DISCHARGE SIZE | 4 inch |
SUCTION SIZE | 6 inch |
SOLIDS HANDLING | Solids up to 3.5 inches |
MAX SPEED | 1800 RPM |
PERCENT SOLIDS | Up to 40-70% Solids |
CU YD MATERIAL HR | 75-150 |
INCLUDED EQUIPMENT
• 4-inch High Chrome Eddy Pump with a 100KW Submersible Electric Motor
• NEMA 3R VFD
• Floating Dredge
• 300-ft of traversing cable
• Solar panel charging system to charge the lifting winch battery.
• Winches. Remote-Operated Lifting Winch 12V and 110V Traversing Land Winch
• Gas Generator 110 VAC output to power the Traversing 110V Land Winch
REQUIRED EQUIPMENT TO OPERATE DREDGE SLED
- Electric Generator to power the Eddy Pump equal to 100KW OR main line shore power for the Eddy Pump
- 4” material handling discharge hose and floats
OPTIONAL EQUIPMENT TO ENHANCE OPERATION OF DREDGE SLED
- Doppler flow meter
- Discharge line pressure gauge (0-150 psi)
- High pressure jetting ring
EDDY Pump industrial Dredge Sleds are non-clog pumps designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications
Available in alternative power options and pump sizes depending on your application
APPLICATIONS
• Mining (Mineral Recovery)
• Lagoon Dredging
• Sand & Agg
• Shallow Industrial Ponds
• Dams
• Fly Ash & Coal Ash
FEATURES & BENEFITS
• Non-Clog, High Viscosity, High
Specific Gravity, HighAbrasives,
Low pH Pumping Design
• Transport 40-70% Solids
• Ability to pump objects of up to
3.5-inches in diameter
APPLICATIONS
• Sludge
• Slurry
• Bio-Sludge
• Mine Tailings
• Minerals
• Sand Mixtures
Production: 250-2500 GPM or 75-150 cubic yards of material per hour | ||
Head with 100HP electric motor (12” rotor) | Up to 160 feet | Up to 61m |
Overall Weight (without pump) | 3,307 lbs | 1,500kg |
Overall Length | 9.8 feet | 3 m |
Overall Height | 5.6 feet | 1.7 m |
Overall Width | 12.5 feet | 3.8 m |
Depth masts max lift (above waterline, pump retracted) | 17.4 feet | 5.3 m |
Standard Operating Depths | 1.6 to 16 feet | 0.5 to 5m |
PUMP CURVE
A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is
matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency.
EDDY Pumps are primarily used for high solids, slurry, sludge, and dewatering
EDDY Pump – 4 Inch 4000 – Pump Curve
WE PUMP SOLIDS, NOT WATER
Call for Sales or Support
If you need help with Pump Selection, Sales or Engineering Support
Call 619-404-1916