Excavator Dredge Pump Attachment
10-inch
EXF-10000 10-inch Hydraulic Excavator Attachment
OPERATING LEVELS
MIN FLOW 1200 GPM
MAX FLOW 5000 GPM
HEAD RANGE Up to 200 ft
DISCHARGE SIZE 10 inch
SUCTION SIZE 12 inch
SOLIDS HANDLING Solids up to 9 inches
MAX SPEED 1800 RPM
PERCENT SOLIDS Up to 40-70
RECOMMENDED SENSORS
Hydraulic Pressure Gauge for pumps and cutter head circuit to operator (0-6000 PSI)
Magnetic Flow meter to maintain stable plug free pipeline flow and maximize production
REQUIRED EQUIPMENT TO OPERATE ATTACHMENT
EDDY Pump circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 120 GPM at 5000 PSI (500cc motor)
Cutterhead circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 20-28 GPM at 5000 PSI (2150cc motor)
10” material handling discharge hose and hydraulic lines plumbed out to the end of the boom
Crossover check valve to prevent damage to hydraulic motor and prevent pump rotor from coming off
Minimum excavator carrier weight requirements: 60-94 tons / 54,400-85,000 kg
A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is
matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency.
EDDY Pumps are primarily used for high solids, slurry, sludge, and dewatering.
EDDY Pump – 10 Inch HD 10000 Heavy Duty Slurry Pump – Pump Curve
APPLICATIONS
• Mining
• Chemical
• Sand & Agg
• Oil and Gas
• Paper & Pulp
• Fly Ash & Coal Ash
FEATURES & BENEFITS
• Non-Clog, High Viscosity, High
Specific Gravity, High Abrasives,
Low pH Pumping Design
• Transport 40-70% Solids
• Ability to pump objects of up to 9-
inches in diameter
APPLICATIONS
• Sludge
• Slurry
• Drilling Mud
• Mine Tailings
• Grit
• Sand Mixtures
OPTIONAL EQUIPMENT TO ENHANCE OPERATION OF DREDGE
- Magnetic flow meter
- Discharge line pressure gauge (0-150 psi)
- Quick Prime” Valve (requires small 24volt air system)
- Pivot mounted Discharge hose carrier (adaptable to most machines)
- Recirculation system for pre-mixing applications (requires small 24-volt air system)
STANDARD CUTTER HEAD
SELF-CLEANING HEAD
WATTER JETTING RING
LINER-SAFE WHEELS
RE-CIRCULATION
EXTENDED CUTTER HEAD
AUGER HEAD
MIXER HEADS
PUMP CURVE
A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is
matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency.
EDDY Pumps are primarily used for high solids, slurry, sludge, and dewatering.
EDDY Pump – 10 Inch HD 10000 Heavy Duty Slurry Pump – Pump Curve
*General pump curve based on water with 1200 RPM motor. Contact us with your specific material for a custom pump curve.
WE PUMP SOLIDS, NOT WATER
Call for Sales or Support
If you need help with Pump Selection, Sales or Engineering Support
Call 619-404-1916