Dredge Sled – Patented Lagoon Dredging Equipment Hydraulic Driven 6-Inch​

Model: DSH-6000

dredgesled

OPERATING LEVELS

MIN FLOW450 GPM
MAX FLOW2000 GPM
HEAD RANGEUp to 200 ft
DISCHARGE SIZE6 inch
SUCTION SIZE8 inch
SOLIDS HANDLINGSolids up to 5.5 inches
MAX SPEED1800 RPM
PERCENT SOLIDSUp to 40-70% Solids
CU YD MATERIAL HR150-200

INCLUDED EQUIPMENT

• 6-inch High Chrome Eddy Pump with a Hydraulic Motor
• 250hp HPU (hydraulic power unit)

• Floating Dredge

• 300-ft of traversing cable

• Solar panel charging system to charge the lifting winch battery.

• Winches. Remote-Operated Lifting Winch 12V and 110V Traversing Land Winch

• Gas Generator 110 VAC output to power the Traversing 110V Land Winch

REQUIRED EQUIPMENT TO OPERATE ATTACHMENT

  • 6” material handling discharge hose and floats

 

OPTIONAL EQUIPMENT TO ENHANCE OPERATION OF DREDGE

  • Wireless Doppler flow meter
  • Discharge line pressure gauge (0-150 psi)
  • High pressure jetting ring

 

EDDY Pump industrial Dredge Sleds are non-clog pumps designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

Available in alternative power options and pump sizes depending on your application.

APPLICATIONS
• Mining (Mineral Recovery)
• Lagoon Dredging

• Sand & Agg

• Shallow Industrial Ponds

• Dams

• Fly Ash & Coal Ash

FEATURES & BENEFITS
Non-Clog, High Viscosity, High
Specific Gravity, HighAbrasives,
Low pH Pumping Design

Transport 40-70% Solids

Ability to pump objects of up to
5.5-inches in diameter

APPLICATIONS
• Sludge
• Slurry

• Bio-Sludge

• Mine Tailings

• Minerals

• Sand Mixtures

GENERAL SPECS

Production: 450-2500 GPM or 150-200 cubic yards of material per hour    
Head with 250HP hydraulic motor (12” rotor) Up to 160 feet Up to 61m
Overall Weight (without pump) 4,307 lbs 1,953kg
Overall Length 9.8 feet 3 m
Overall Height 5.6 feet 1.7 m
Overall Width 12.5 feet 3.8 m
Depth masts max lift (above waterline, pump retracted) 17.4 feet 5.3 m
Standard Operating Depths 1.6 to 16 feet 0.5 to 5m
     
     

PUMP CURVE

A pump curve is a graphical representation of a pumps ability to produce flow against a certain head. The science is
matching a curve that is accurate for your project, leading to the proper pump selection and best efficiency.

EDDY Pumps are primarily used for high solids, slurry, sludge, and dewatering

EDDY Pump – 6 Inch HD 6000 – Pump Curve

WE PUMP SOLIDS, NOT WATER

Call for Sales or Support

If you need help with Pump Selection, Sales or Engineering Support
Call 619-404-1916