Question 1

What is the function of the impeller?

Accepted Answer

The main function of an impeller is to transfer energy from the motor. The motor drives the pump to the fluid being pumped. This is achieved by rotating the impeller at high speeds. This creates a centrifugal force that moves the fluid outwards from the center of the impeller and into the pump’s discharge.

Question 2

What are the three types of impellers?

Accepted Answer

Impeller flow designs can take on three distinct types: axial, radial, and mixed. Because centrifugal pumps are also classified in this manner, the impeller selection depends upon matching the pump’s flow characteristic to that of the impeller.

Question 3

What is the advantage of an impeller pump?

Accepted Answer

One of the main advantages of an impeller pump is its ability to handle fluids with high solids content, such as sewage or slurry. Impeller pumps are also efficient and can handle various flow rates and pressures.

Question 4

What is the difference between an impeller and a centrifugal pump (impeller vs. centrifugal pump)?

Accepted Answer

An impeller is a component of a centrifugal pump, which is a type of pump that uses an impeller to transfer energy to a fluid. So, while an impeller is a specific part of a centrifugal pump, the term “centrifugal pump” refers to the entire pump system.

Question 5

What are the various types of impeller blade designs?

Accepted Answer

Three different types of impellers are available for most mechanical agitators: flat blade, canted blade, and proprietary. The flat blade impeller moves the fluid radially away from the blades.

Question 6

Which blades are used in centrifugal pumps?

Accepted Answer

Generally, centrifugal fans have three types of blades: forward blade, backward blade, and radial blade.

Question 7

What is the difference between impeller and propeller (impeller vs. propeller)?

Accepted Answer

An impeller is a type of rotor used in a centrifugal pump, while a propeller is a type of rotor used in a marine propulsion system. Impellers are designed to move fluids, while propellers are designed to move a vehicle through water.

Question 8

Which blades are the most commonly used blade configuration of a centrifugal pump?

Accepted Answer

The most commonly used blade configuration for centrifugal pumps is the backward-curved blade. This design is known for its high efficiency and low maintenance requirements.

Question 9

What is the cost of an impeller?

Accepted Answer

The cost of an impeller can vary widely depending on factors such as the material it is made from, its size, and its complexity. In general, impellers made from high-quality materials such as stainless steel or titanium will be more expensive than those made from lower-quality materials such as plastic.

Question 10

Which type of impeller is best?

Accepted Answer

The best impeller type for a given application will depend on factors such as the fluid type being pumped, and the desired flow rate and pressure. Also, it depends on the specific requirements of the system. Some common types of impellers include closed, semi-open, and open impellers.

Question 11

What is the principle of pump work?

Accepted Answer

The principle of pump work is based on the transfer of energy from a motor to a fluid, which is achieved through the use of an impeller. As the impeller rotates, it creates a centrifugal force that moves the fluid from the center of the impeller to the pump’s discharge, thus generating pressure and flow.

Question 12

What is an impeller also called? (impeller vs agitator) | Difference between impeller and agitator

Accepted Answer

An impeller is also sometimes called a rotor or an agitator or an impeller wheel.

Question 13

Which type of impeller is most common?

Accepted Answer

The most common impeller type is the closed impeller, known for its high efficiency and ability to handle a wide range of fluids and solids. Closed impellers are often used in industrial applications such as wastewater treatment, chemical processing, and mining.

Impeller selection guide – Types, Advantages, Disadvantages and Tips

Differences between Centrifugal, Positive Displacement, Slurry, Dredge, Self-Priming & Submersible Pumps

Recent Blogs

Equipment

Slurry Pumps

Submersible Slurry Pumps

Flooded Suction Pumps

Self-Priming Slurry Pumps

HD (Heavy Duty) Pump Line

High Head Pumps

Self Priming Pumps

Navy & Marine Pumps

Oil Drill Cuttings Pumps

Chopper Wastewater Pumps

Accessories

Dredging Equipment

Dredge Consulting

Contact Us